volume group not found on linux laptop after update

 If you encounter the error "Volume group not found" on your Linux laptop after an update, it's likely related to issues with the LVM (Logical Volume Manager) configuration. Here are steps to troubleshoot and potentially resolve this issue:


1. **Check LVM Status**:

   First, verify that LVM is enabled and running. You can check the status of LVM using the following command:


   ```bash

   sudo systemctl status lvm2

   ```


   If it's not running, you can start the LVM service using:


   ```bash

   sudo systemctl start lvm2

   ```


2. **Scan for Volume Groups**:

   You can scan for available volume groups using the `vgscan` command:


   ```bash

   sudo vgscan

   ```


   This command should detect and make available any existing volume groups.


3. **Activate Volume Groups**:

   If volume groups are not active, you can activate them with the `vgchange` command:


   ```bash

   sudo vgchange -ay

   ```


   This will activate all volume groups on your system.


4. **Check /etc/fstab**:

   Review your `/etc/fstab` file to ensure that the correct logical volumes are mounted at boot. It's possible that the update may have changed some configurations. Make any necessary corrections to ensure your logical volumes are correctly specified.


5. **Review Kernel Updates**:

   It's also possible that a kernel update is causing this issue. If this is the case, you might need to reboot into an older kernel version (if available) to access your LVM partitions until the issue is resolved in a subsequent update.


6. **Check Disk Health**:

   Verify the health of your physical storage devices (e.g., hard drives or SSDs). Use tools like `smartctl` to check for hardware issues. A failing storage device can lead to LVM-related problems.


7. **Backup Important Data**:

   As a precaution, make sure to back up your important data from your LVM partitions if you haven't already. In some cases, data recovery may be necessary.


8. **Consult Distribution-Specific Support**:

   If you're using a specific Linux distribution (e.g., Ubuntu, CentOS, etc.), check for distribution-specific forums, bug reports, or support channels. Sometimes, issues like this may be related to distribution-specific updates.


9. **LVM Repair**:

   If the above steps do not resolve the issue, consider using LVM repair tools like `lvcreate`, `lvextend`, or `vgextend` to fix specific problems within the LVM configuration. It's advisable to consult the LVM documentation or seek help from experienced administrators if you're not familiar with these tools.


If you're not comfortable performing these steps or if the problem persists, it may be a good idea to seek assistance from a Linux system administrator or experienced user who can help you diagnose and fix the issue.

Comments

Post a Comment

Popular posts from this blog

bad character U+002D '-' in my helm template

 In Helm templates, the hyphen character (`-`) can sometimes be treated as a reserved character, particularly when defining values or labels. To include a hyphen character in a Helm template without issues, you can use one of the following approaches: 1. **Quoting the Hyphen:**    You can enclose the hyphen in double quotes, like this:    ```yaml    key: "-"    ```    This way, Helm will interpret the hyphen as a string rather than an operator. 2. **Using Backticks:**    If you need to use the hyphen within a Go template function or inside backticks, you can escape it with a backslash (`\`), like this:    ```yaml    value: `{{ .Values.someField | printf "%s \\-" }}`    ```    The backslash prevents Helm from interpreting the hyphen as a special character. 3. **Variable Assignment:**    Assign the value to a variable and use it. For example:    ```yaml    {{- $hyphen := "-" }}    key: {{ $hyphen }}    ```    This way, you can use the variable `$hyphen` wher
Read more

GitLab pipeline stopped working with invalid yaml error

 When your GitLab pipeline has stopped working with an "invalid YAML" error, it means there's a problem with your `.gitlab-ci.yml` file. This could be due to syntax errors, incorrect indentation, or other issues in your pipeline configuration. Here's how to troubleshoot and resolve this issue: 1. **Check for Syntax Errors**:    Carefully review your `.gitlab-ci.yml` file for any syntax errors. Common issues include missing colons, indentation problems, or mismatched quotation marks. Use a YAML linter or an online YAML validator to identify and correct syntax errors. 2. **Indentation**:    YAML relies heavily on proper indentation. Make sure that all lines within the same block have consistent indentation (typically using spaces, not tabs). Incorrect indentation can cause YAML parsing errors. 3. **Dashes and Lists**:    Ensure that you use the correct syntax for lists (arrays) in YAML by starting each item with a dash (`-`). Be consistent with your use of dashes throug
Read more

How do I add a printer in OpenSUSE which is being shared by a CUPS print server?

 To add a printer in openSUSE that is being shared by a CUPS print server, you can use the following steps: 1. **Ensure CUPS Client is Installed:**    Make sure your openSUSE system has the CUPS client tools installed. You can install them using the following command:    ```bash    sudo zypper install cups-client    ``` 2. **Discover Available Printers:**    Use the `lpinfo` command to discover available printers on your CUPS print server. Replace `cups-server-hostname` with the hostname or IP address of your CUPS server:    ```bash    lpinfo -v -h cups-server-hostname:631    ```    This command should list the printers shared by the CUPS server. 3. **Add a Printer:**    Use the `lpadmin` command to add a printer. Replace `printer-name` with the name of the printer you want to add and `printer-uri` with the URI obtained from the `lpinfo` command:    ```bash    sudo lpadmin -p printer-name -E -v printer-uri    ```    For example:    ```bash    sudo lpadmin -p MyPrinter -E -v socket://cu
Read more