Moved bin and other folders! How to get them back?

 If you've accidentally moved important system directories like `/bin`, `/usr`, or others, you may face significant issues with your Linux system. Here are some steps to attempt to recover from this situation:


1. **Recover from a Backup**:

   If you have a system backup, the easiest and safest way to recover is by restoring the backup. This will bring your system back to a known good state. If you don't have a recent backup, this might be a good time to consider implementing a backup strategy for the future.


2. **Use a Live CD or Live USB**:

   If you don't have a backup, you can use a Linux live CD or live USB to boot into a minimal system. From there, you can access your system's filesystem and attempt to move the directories back to their original locations.


   a. Boot from a live CD or USB.

   b. Mount your system's root partition. You might need to use a command like `sudo mount /dev/sdX /mnt`, replacing `/dev/sdX` with your actual root partition.

   c. Use the `mv` command to move the directories back to their original locations. For example: `sudo mv /mnt/moved-bin /mnt/bin`.

   d. Unmount the partition when you're done: `sudo umount /mnt`.


3. **Manual Restoration**:

   If you can't use a live CD or USB, you may need to manually copy the missing directories from a similar system. This is risky, and you should only attempt it if you have a good understanding of your system's directory structure.


4. **Reinstall the Operating System**:

   As a last resort, if the damage is extensive and you cannot recover, consider reinstalling the operating system. This is a time-consuming process and should only be done if other options fail.


Please note that moving critical system directories can lead to a non-bootable system, data loss, or other problems. It's crucial to be cautious and back up data if possible before attempting any recovery actions. Additionally, the specific steps may vary based on your Linux distribution and the extent of the damage. If you're not comfortable with these operations, it's advisable to seek assistance from someone with Linux system administration experience.

Comments

Post a Comment

Popular posts from this blog

bad character U+002D '-' in my helm template

 In Helm templates, the hyphen character (`-`) can sometimes be treated as a reserved character, particularly when defining values or labels. To include a hyphen character in a Helm template without issues, you can use one of the following approaches: 1. **Quoting the Hyphen:**    You can enclose the hyphen in double quotes, like this:    ```yaml    key: "-"    ```    This way, Helm will interpret the hyphen as a string rather than an operator. 2. **Using Backticks:**    If you need to use the hyphen within a Go template function or inside backticks, you can escape it with a backslash (`\`), like this:    ```yaml    value: `{{ .Values.someField | printf "%s \\-" }}`    ```    The backslash prevents Helm from interpreting the hyphen as a special character. 3. **Variable Assignment:**    Assign the value to a variable and use it. For example:    ```yaml    {{- $hyphen := "-" }}    key: {{ $hyphen }}    ```    This way, you can use the variable `$hyphen` wher
Read more

GitLab pipeline stopped working with invalid yaml error

 When your GitLab pipeline has stopped working with an "invalid YAML" error, it means there's a problem with your `.gitlab-ci.yml` file. This could be due to syntax errors, incorrect indentation, or other issues in your pipeline configuration. Here's how to troubleshoot and resolve this issue: 1. **Check for Syntax Errors**:    Carefully review your `.gitlab-ci.yml` file for any syntax errors. Common issues include missing colons, indentation problems, or mismatched quotation marks. Use a YAML linter or an online YAML validator to identify and correct syntax errors. 2. **Indentation**:    YAML relies heavily on proper indentation. Make sure that all lines within the same block have consistent indentation (typically using spaces, not tabs). Incorrect indentation can cause YAML parsing errors. 3. **Dashes and Lists**:    Ensure that you use the correct syntax for lists (arrays) in YAML by starting each item with a dash (`-`). Be consistent with your use of dashes throug
Read more

How do I add a printer in OpenSUSE which is being shared by a CUPS print server?

 To add a printer in openSUSE that is being shared by a CUPS print server, you can use the following steps: 1. **Ensure CUPS Client is Installed:**    Make sure your openSUSE system has the CUPS client tools installed. You can install them using the following command:    ```bash    sudo zypper install cups-client    ``` 2. **Discover Available Printers:**    Use the `lpinfo` command to discover available printers on your CUPS print server. Replace `cups-server-hostname` with the hostname or IP address of your CUPS server:    ```bash    lpinfo -v -h cups-server-hostname:631    ```    This command should list the printers shared by the CUPS server. 3. **Add a Printer:**    Use the `lpadmin` command to add a printer. Replace `printer-name` with the name of the printer you want to add and `printer-uri` with the URI obtained from the `lpinfo` command:    ```bash    sudo lpadmin -p printer-name -E -v printer-uri    ```    For example:    ```bash    sudo lpadmin -p MyPrinter -E -v socket://cu
Read more