Fix: Binding escape-j prefix in tmux conflicts with neovim

 When binding the escape key in Tmux, especially using the `tmux.conf` configuration file, you might encounter conflicts with Neovim, as both applications use the escape key for different purposes.


To resolve this conflict, you can try the following:


1. Change the Tmux escape key:

   In your `tmux.conf` file, you can change the escape key to a different key combination. For example, you can use `Ctrl-a` as the Tmux prefix instead of `Ctrl-b`. This can be done with the following line in your `tmux.conf`:

   ```

   set -g prefix C-a

   bind C-a send-prefix

   ```

   This would make Tmux use `Ctrl-a` as the prefix key, avoiding conflicts with Neovim.


2. Adjust Neovim keybindings:

   If you prefer to keep the Tmux escape key as it is, you can adjust Neovim's keybindings to use a different key combination for specific commands or mappings. This might require modifying your Neovim configuration.


3. Check for other key conflicts:

   Review both your Tmux and Neovim configurations for any other key bindings that might be conflicting. Adjust them as necessary to avoid conflicts.


Remember to reload or restart both Tmux and Neovim after making these changes for them to take effect.

Comments

Post a Comment

Popular posts from this blog

bad character U+002D '-' in my helm template

 In Helm templates, the hyphen character (`-`) can sometimes be treated as a reserved character, particularly when defining values or labels. To include a hyphen character in a Helm template without issues, you can use one of the following approaches: 1. **Quoting the Hyphen:**    You can enclose the hyphen in double quotes, like this:    ```yaml    key: "-"    ```    This way, Helm will interpret the hyphen as a string rather than an operator. 2. **Using Backticks:**    If you need to use the hyphen within a Go template function or inside backticks, you can escape it with a backslash (`\`), like this:    ```yaml    value: `{{ .Values.someField | printf "%s \\-" }}`    ```    The backslash prevents Helm from interpreting the hyphen as a special character. 3. **Variable Assignment:**    Assign the value to a variable and use it. For example:    ```yaml    {{- $hyphen := "-" }}    key: {{ $hyphen }}    ```    This way, you can use the variable `$hyphen` wher
Read more

GitLab pipeline stopped working with invalid yaml error

 When your GitLab pipeline has stopped working with an "invalid YAML" error, it means there's a problem with your `.gitlab-ci.yml` file. This could be due to syntax errors, incorrect indentation, or other issues in your pipeline configuration. Here's how to troubleshoot and resolve this issue: 1. **Check for Syntax Errors**:    Carefully review your `.gitlab-ci.yml` file for any syntax errors. Common issues include missing colons, indentation problems, or mismatched quotation marks. Use a YAML linter or an online YAML validator to identify and correct syntax errors. 2. **Indentation**:    YAML relies heavily on proper indentation. Make sure that all lines within the same block have consistent indentation (typically using spaces, not tabs). Incorrect indentation can cause YAML parsing errors. 3. **Dashes and Lists**:    Ensure that you use the correct syntax for lists (arrays) in YAML by starting each item with a dash (`-`). Be consistent with your use of dashes throug
Read more

How do I add a printer in OpenSUSE which is being shared by a CUPS print server?

 To add a printer in openSUSE that is being shared by a CUPS print server, you can use the following steps: 1. **Ensure CUPS Client is Installed:**    Make sure your openSUSE system has the CUPS client tools installed. You can install them using the following command:    ```bash    sudo zypper install cups-client    ``` 2. **Discover Available Printers:**    Use the `lpinfo` command to discover available printers on your CUPS print server. Replace `cups-server-hostname` with the hostname or IP address of your CUPS server:    ```bash    lpinfo -v -h cups-server-hostname:631    ```    This command should list the printers shared by the CUPS server. 3. **Add a Printer:**    Use the `lpadmin` command to add a printer. Replace `printer-name` with the name of the printer you want to add and `printer-uri` with the URI obtained from the `lpinfo` command:    ```bash    sudo lpadmin -p printer-name -E -v printer-uri    ```    For example:    ```bash    sudo lpadmin -p MyPrinter -E -v socket://cu
Read more